Simpson Strong-Tie
Simpson Strong-Tie Titen HD Series THD37500H CTN Screw Anchor, 3/8 in Dia, 5 in L, Carbon Steel, Zinc, 50/PK
- Diameter: 3/8 in
- Drill Size: 3/8 in
- Finish: Zinc
- Fixture Thickness: 1/2 to 9/16 in
- Head Type: Hex
- Model #: THD37500H CTN
- UPC #: 707392175315
- SKU: 39217531
Product Details
The original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titan HD® offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, the Titan HD® demonstrates industry leading performance even in seismic conditions. The stainless-steel Titan HD® is the optimal choice for applications in corrosive or extreme environments such as salt water or when chemical or corrosive solutions are present.Key Features
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required, designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD® installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer, unless required by code and provides a clean installed appearance
Item Specifications
| Diameter | 3/8 in |
|---|---|
| Drill Size | 3/8 in |
| Finish | Zinc |
| Fixture Thickness | 1/2 to 9/16 in |
| Head Type | Hex |
| Length | 5 in |
|---|---|
| Material | Carbon Steel |
| Minimum Clearance | 1/2 in |
| Minimum Concrete Thickness | 4 to 5 in |
| Tensile Strength | 110000 psi |
MORE DETAILS:
- Simpson_Strong_Tie_100094745_Specification_Sheet.pdf
- Application: For bracing and formwork